Zoom meeting and information for the virtual conference have been sent to presenters. Please notify us at icramet@brin.go.id if you have not received it
Video Presentation Guidelines and Virtual Background for 2023 ICRAMET virtual conference can be downloaded here
"Empowering Global Progress: Innovative Electronic and Telecommunication Solutions for a Sustainable Future"
The 2023 International Conference on Radar, Antenna, Microwave, Electronics and Telecommunications (ICRAMET) will be held virtually on November 15th - 16th, 2023. The conference is an annual event organized by Research Organization for Electronics and Informatics, National Research and Innovation Agency that aims to bring together researchers, scientists, engineers, students and practitioners interested in the advanced technologies of communication and electronics including Remote Sensing and Radar System, Antenna Devices and Techniques, RF and Microwave Theory and Devices, Electronics Materials, Devices and Components/Circuits, Wireless and Wired Communications, Signal and Image Processing Techniques, Mechatronics and related topics.
The ICRAMET provides a forum for exchange of information on the state-of-the art research within all of the related topics as well as aims to build and strengthen scientific cooperation among the research institutions. The 2023 ICRAMET is also technically co-sponsored by IEEE Indonesian Section. This website is the only official website of The ICRAMET 2023. The other conferences entitled ICRAMET is not correlated to this conference
Invited Speakers
Asrul Izam Azmi is an Associate Professor at Universiti Teknologi Malaysia (UTM) in Malaysia. He received the B.Eng. and M.Eng. degrees in electrical engineering from the Universiti Teknologi Malaysia (UTM), Johor Bahru, in 2001 and 2004, respectively, and the Ph.D. degree from the University of New South Wales (UNSW), Sydney, in 2012. He joined the UTM, as a Tutor, in 2002, where he is currently a Senior Lecturer. He has been appointed as the Head of the Lightwave Communication Research Group, UTM, since 2014. He then joined Jurutera Budiman (M&E) Sdn Bhd Consultant Firm from September 2017 to November 2018. He went to Harbin Engineering University as a Visiting Researcher in March and July 2019. His research work emphases on development of various fiber sensing techniques and its applications.
Iyad Dayoub is a Professor of communications engineering at Université Polytechnique Hauts-de-France (UPHF). He received the B.Eng. degree in telecommunications and electronics in Syria, in 1993, the M.A.Sc. degree in electrical engineering from the National Polytechnic Institute of Lorraine (INPL), and the Ph.D. degree from the University of Valenciennes and the Institute of Electronics, Microelectronics and Nanotechnology (IEMN), in 2001. He worked as a System Engineer with Siemens, Middle East; and a Researcher with Alcatel Business Systems, Alcatel, Colombes, Paris. He was an Adjunct Professor with Concordia University, Montreal, from 2010 to 2014. He is currently a Professor of communications engineering. His current research activities at IEMN, Université Polytechnique Hauts-de-France (UPHF) and INSA H-d-F are focused on wireless communications, high-speed communications, cognitive radio, and hybrid radio-optic technologies. He was a member of the National Council of Universities (CNU), France, from 2007 to 2014, in the area of electrical engineering, electronics, photonics, and systems. He is a member of several international conference advisory committees, technical program committees, and organization committees, such as VTC, GLOBECOM, ICC, PIMRC, and WWC.
Kenshu Seto is an Associate Professor of Research and Education Institute for Semiconductors and Informatics at Kumamoto University in Japan. He received his B.S. in electrical engineering, M.S. and D. Eng. in electronics engineering from the University of Tokyo in 1997, 1999 and 2004, respectively. From 2004 to 2006, he was a researcher at VLSI Design and Education Center (VDEC), the University of Tokyo. Prior to joining Kumamoto University in 2023, he was with Tokyo City University. His primary research interests include VLSI design.
Josaphat Tetuko Sri Sumantyo is a Professor of remote sensing at Chiba University and Universitas Sebelas Maret (UNS). He received the B.Eng. and M.Eng. degrees in Electrical and Computer Engineering from Kanazawa University, Japan in 1995 and 1997, respectively (Subsurface Radar Systems) and the Ph.D. degree in Artificial System Sciences (Applied Radio Wave and Radar Systems) from Chiba University, Japan in 2002. He was an Associate Professor (permanent staff) at the Center for Environmental Remote Sensing (CEReS), Chiba University from 2005 to 2013, then Full Professor (permanent staff) at the same center from 2013 to now. His main interests are theoretically scattering microwave analysis and its applications in microwave (radar) remote sensing, especially synthetic aperture radar (SAR) and subsurface radar (VLF) including DInSAR and PS-InSAR, analysis and design of antennas for mobile satellite communications and microwave sensors, development of microwave sensors including SAR for Unmanned Aerial Vehicle (UAV) and microsatellite development. He manages Josaphat Microwave Remote Sensing Laboratory (JMRSL), Center for Environmental Remote Sensing (CEReS), Chiba University, Japan.
Conference Scopes/Tracks
Topics of interest include, but are not limited to, the following:
- Remote Sensing and Radar System
Radar systems analysis and modeling, Radar and signal processing, Short range FM radar, Millimeter-wave radar targets, Radar reflectivity (land and sea), Radar system performance modeling, Interception and analysis of radar signal, Signal detection and estimation - Antenna Devices and Techniques
Antenna design, modelling, simulation - RF and Microwave Theory and Devices
RF and microwave circuit design, engineering, physical aspects of RF and microwave devices, electromagnetic fields and waves - Electronics Materials, Devices, Components, and Circuits
Microelectronics, integrated circuits, semiconductor devices, photonic devices, optics, sensor, biosensor, photovoltaic and magnetic materials - Wireless and Wired Communications
IoT, 5G, WiMAX, mobile broadband, cellular technology - Signal and Image Processing Techniques
Digital signal processing, coding and transmission, signal processing in communication, image acquisition, storage and retrieval - Control System, Robotics and Mechatronics
Intelligence Control Systems, Fuzzy Control Systems, Control Theory, Real Time Control Systems, IoT, embedded systems, system on chip (SoC)
Guideline for Paper Submission
All papers must be submitted electronically through EDAS (https://edas.info/N30762). All papers must be written in English and formatted following the IEEE Xplore standard (double-column format A4 size). Please download the template with various format using the following links. Failing to confirm the standard format will result in rejection.
- All papers must be submitted electronically through EDAS Conference papers submission system (https://edas.info/N30762). All regular and invited papers are limited to six (6) pages. Authors may upload longer manuscript up to a maximum of eight (8) pages total. However, each page in excess of six will incur an additional charge of 100 USD. Our EDAS system will not permit longer papers to be uploaded.
- The decision regarding the acceptance of the papers is at the discretion of the Technical Program Committee. Note that short manuscripts are not considered.
- Accepted papers will be submitted for inclusion into IEEE Xplore subject to meeting IEEE Xplore’s scope and quality requirements.
- Please be advised that we adopt IEEE no-show policy for non-presented paper (source: IEEE-Handling of Non-Presented Papers). IEEE reserves the right to exclude a paper from distribution after the conference, including IEEEXplore Digital Library, if the paper is not presented by the author at the conference.
- At least one of the authors listed on the paper must register for the 2023 ICRAMET to upload the final manuscript.
Only papers that have been presented at the conference and corrected according to reviewer(s) suggestion will be considered to be included in the final proceedings for the submission to the IEEE Xplore digital library.
Important Date
- Call for Paper: May 1st, 2023
- Full Paper Submission:
August 20th, 2023,Extended to September 10th, 2023, Extended to October 4th, 2023 - Notification of Accepted Paper:
September 21st 2023,Extended to October 11th, 2023, Extended to November 1st, 2023 - Camera Ready & Final Manuscript of Revised Full Paper (MS Word & PDF): November 5th, 2023
- Final registration and payment deadline: November 7th, 2023
- Main conference events: November 15-16th, 2023
Venue
The seminar will be held online using multiple platforms. The platform will be announced later. In general, the plenary session will be using Meeting platform and Live interaction platform. While parallel sessions will be using Meeting platform limited to the participant in each room
Proceeding
Accepted papers will be submitted for inclusion into IEEE Xplore subject to meeting IEEE Xplore’s scope and quality requirements.
The Proceedings of previous ICRAMET have been published in IEEE Xplore:
Previous Event
The previous conference of ICRAMET :
- 2022 ICRAMET: https://conference.brin.go.id/icramet2022
Programme (Tentative)
Day 1 (Wednesday, 15 November 2023), time in GMT+708.00 – 08.20 : Registration and Housekeeping Link Zoom (shared to all presenters and participants by email) 08.20 – 08.25 : Program Outlining MC 08.25 – 08.30 : Opening Remark Yuliar Firdaus, Ph.D (Chair of ICRAMET 2023) 08.30 – 08.35 : Opening Remark Prof. Linawati (Secretary of IEEE Indonesia Section) 08.35 – 08.40 : Opening Remark Dr. Budi Prawara (Chairman of OREI, National Research and Innovation Agency) 08.40 – 08.50 : Welcome Speech Dr. Laksana Tri Handoko (Chairman of National Research and Innovation Agency) 08.50 – 08.55 : Screen Capturing Session MC 08.55 – 09.35 : Gold Patron Session Talk : Anritsu Pte Ltd (Singapore) / Unitronic Jaya – “Long Distance RF Characterization with Modular/ Distributed VNA” Voon Yen, Liew (Field Marketing Manager from Anritsu Pte Ltd (Singapore)) 09.35 – 10.20 : Keynote Talk 1: Fiber Optic Sensor: Advanced Techniques and Applications Assoc. Prof. Ir. Dr. Asrul Izam Azmi – Universiti Teknologi Malaysia (UTM); (Session Moderator: Dr. Erry Dwi Kurniawan – BRIN) 10.20 – 10.30 : Morning Break 10.30 – 11:45 : Parallel Session 1, 2, and 3 (breakout into 3 rooms) 11:45 – 13.00 : Lunch Break 13.00 – 13:45 : Keynote Talk 2: Development of Innovative Microwave Remote Sensors for Disaster and Environmental Monitoring Prof. Josaphat Tetuko Sri Sumantyo, Ph.D. – Chiba University and Universitas Sebelas Maret; (Session Moderator: Dr. Bambang Setiadi – BRIN) 13:45 – 14:45 : Parallel Session 4 and 5 (breakout into 2 rooms) 14:45 – 15:00 : Afternoon Break 14.50 – 16.15 : Parallel session 6, 7, and 8 (breakout into 3 rooms) 16.15 – 16.20 : Closing Day #1 Day 2 (Thursday, 16 November 2023), time in GMT+708.10 – 08.20 : Registration Link Zoom (shared to all presenters and participants) 08.20 – 08.25 : Program Outlining MC 08.25 – 09.10 : Keynote Talk 3: Software code optimizations for high-level synthesis (HLS) Prof. Kenshu Seto – Kumamoto University, Japan ; (Session Moderator: Dr. Natalita Maulani Nursam, M.Phil.) 09.10 – 10.25 : Parallel Session 9, 10, and 11 (breakout into 3 rooms) 10.25 – 10.35 : Morning Break 10.35 – 11:50 : Parallel Session 12, 13, and 14 (breakout into 3 rooms) 11:50 – 13.00 : Lunch Break 13.00 – 14.00 : Parallel Session 15 and 16 (breakout into 2 rooms) 14.00 – 15.15 : Parallel Session 17 and 18 (breakout into 2 rooms) 15:15 – 15:30 : Afternoon Break 15:30- 16:15 : Keynote Talk 4 : Towards 6G: standardization, use-cases and emerging technologies: application to ITS Prof. Iyad Dayoub – INSA Hauts-de-France & Univ. Polytechnique Hauts-de-France; (Session Moderator: Dr. Agus Subekti, M.T.) 16:15 – 16:30 : Award TPC Team 16:-30 – 16:35 : Closing 1 Yuliar Firdaus, Ph.D (Chair of ICRAMET 2023) 16:-30 – 16:35 : Closing 2 Dr. Yusuf Nur Wijayanto (Head of PRE-BRIN) Notes: ● Keynote speakers: 30-minute presentation + 15-minute Q&A ● Regular presenters: 10-minute presentation + 5-minute Q&A |
Schedules for Each Session:
*Session Chair: (TBA, please periodically check the page for updates)
** The presenter not specified yet, please periodically check the page for updates
Day 1 – Wednesday, 15 November 2023
Parallel Session 1; Control System, Robotics and Mechatronics
Breakout Room 1 – 10:30 – 11:45 GMT+7
Session Chair: Dr. Bondan Suwandi S.T., M.Sc. – National Research and Innovation Agency (BRIN), Indonesia
10:30 – 10:45: S1.1 Fast Response Nonlinear Injection Control of Isolated DC-DC Converter for Cable-based Seabed Observatory Platform
Michael Purwoadi – National Research and Innovation Agency (BRIN), Indonesia
10:45 – 11:00: S1.2 Improving Load Power Sharing Accuracy in Standalone Microgrid DC Networks Using Intelligent Adaptive Droop Control Based on Fuzzy Logic Control
Fourys Yudo Setiawan Paisey – Institut Teknologi Sepuluh Nopember Surabaya, Indonesia
11:00 – 11:15 : S1.3 Implementation of Kalman Filter for Stabilizing Ultrasonic Sensor Reading on Distilled Ethanol Levels Measurement
Eko Joni Pristianto – National Research and Innovation Agency (BRIN), Indonesia
11:15 – 11:30 : S1.4 Detection of Driver Behaviors Using Convolutional Neural Network with Modified Inception Module
Jimmy Abdel Kadar – National Research and Innovation Agency (BRIN), Indonesia
11:30 – 11:45 S12.4 Wheel Odometry-based Localization for Autonomous Personal Mobility Vehicles
Rakha Pratama – Diponegoro University, Indonesia
Parallel Session 2; Signal & Image Processing Techniques
Breakout Room 2 – 10:30 – 11:45 GMT+7
Session Chair: Yosy Rahmawati – University of Indonesia, Indonesia
10:30 – 10:45 : S2.1 General matrix multiplication (GEMM) evaluation on Cyclone-V SoC FPGA using OpenCL
Iman Firmansyah – National Research and Innovation Agency (BRIN), Indonesia
10:45 – 11:00 : S2.2 Small CNN for Plant Disease Classification Using Quantization-Aware Training: A Case Study on MobileNetV3
Aulia Syaharani – Universitas Sebelas Maret, Indonesia
11:00 – 11:15 : S2.3 Ripeness Classification of Cavendish Bananas using Multi-object Detection Approach
Zaid Cahya – National Research and Innovation Agency (BRIN), Indonesia
11:15 – 11:30 : S2.4 Cognitive Load Assessment through Power Spectral Density in EEG
Artha Ivonita Simbolon – National Research and Innovation Agency (BRIN), Indonesia
11:30 – 11:45 : S2.5 Analyzing Watermarking Color Image Channels with Wavelet and Schur decomposition technique**
Parallel Session 3; Wireless & Wired Communications
Breakout Room 3 – 10:30 – 11:45 GMT+7
Session Chair: Dr. Suyoto, M.T. – National Research and Innovation Agency (BRIN), Indonesia
10:30 – 10:45: S3.1 Performance Evaluation of NOMA-assisted Overlay Communication in Energy-Limited Networks
Van Khuong Ho – Ho Chi Minh City University of Technology, Vietnam
10:45 – 11:00: S3.2 Performance of Distance-Based Clustering Method for RIS-aided D2D Communications in Multicell Cellular Network
Soraida Sabella – University of Lampung, Indonesia
11:00 – 11:15: S3.3 Simulation And Analysis Of Link Failover Using Routing Border Gateway Protocol (BGP) MultiProtocol Label Switching (MPLS) Networks
Imelda UV Simanjuntak – Universitas Mercu Buana, Indonesia
11:15 – 11:30: S3.4 Performance Evaluation of LoRa RFM96 on IoT Telkom Indonesia
Puput Dani Prasetyo Adi – National Research and Innovation Agency (BRIN), Indonesia
11:30 – 11:45: S3.5 Time Synchronization for OFDM Systems Using the Symmetric Correlator-ELM Technique
Salita Ulitia – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 4; (Hybrid): RF and Microwave Theory & Devices ; Antenna Devices & Techniques
Breakout Room 1 – 13:45 – 14:45 GMT+7
Session Chair: Arief Budi Santiko, M.T. – National Research and Innovation Agency (BRIN), Indonesia
13:45 – 14:00: S4.1 Two Dimensional TM010 Axially Symmetric RF Cavity Solver Based on Convolutional Neural Network
Ahsani Hafizhu Shali – National Research and Innovation Agency (BRIN), Indonesia
14:00 – 14:15: S4.2 Design of K-Band Metasurface Beam Splitter
Ashif Aminulloh Fathnan – Nagoya Institute of Technology & National Research and Innovation Agency (BRIN), Indonesia
14:15 – 14:30: S4.3 Antipodal Vivaldi Array Systems for Azimuth and Elevation Beamsteering Applications
Shehroze Amir – National University of Sciences and Technology Islamabad, Pakistan
14:30 – 14:45: S4.4 Design and Realization Bandpass Filter 2.4 GHz Using Symmetric Step Impedance Resonator
Teguh Praludi – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 5; (Hybrid): Remote Sensing & Radar Systems; Antenna Devices & Techniques
Breakout Room 2 – 13:45 – 14:45 GMT+7
Session Chair: Dr. Folin Oktafiani M.T. – National Research and Innovation Agency (BRIN), Indonesia
13:45 – 14:00: S5.1 Experimental Evaluation of Polarimetric Ground Based Synthetic Aperture Radar Imaging using Portable VNA
Nurul Chasanah – University of Indonesia, Indonesia
14:00 – 14:15: S5.2 A Novel Radar Receiver for Joint Radar And Communication Systems
Sevda Şahin – TOBB University of Economics and Technology, Turkey
14:15 – 14:30: S5.3 New Improved Sierpinski Carpet Structures Based Thinned Planar Array to Synthesize Low Sidelobes Radiation Pattern
Ahmed Jameel Abdulqader – Ninevah University, Iraq
14:30 – 14:45: S4.4 Investigation of the Rain Scanner Radar Performance for Reflectivity-Rainfall Estimation in A Co-Location Grid Data
Tiin Sinatra – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 6; Electronics Materials, Components, & Circuits
Breakout Room 1 – 15:00 – 16:15 GMT+7
Session Chair: Dr. Lia Yuliantini – National Research and Innovation Agency (BRIN), Indonesia
15:00 – 15:15: S6.1 Developing A Portable Electrothermal Microcantilever Read-out System
Nelfyenny – National Research and Innovation Agency (BRIN), Indonesia
15:15 – 15:30: S6.2 Development of Controllable LED Light Source for Retinomorphic Sensor Measurement Test
Shafa Muthiah – Sumatera Institute of Technology, Indonesia
15:30 – 15:45: S6.3 Lead (Pb) Detection Analysis Based on Multimode Plastic Fiber Optic Sensor
Muhimmatul Khoiro – Universitas Negeri Surabaya- Indonesia
15:45 – 16:00: S6.4 Enhancing Inverted Perovskite Solar Cell Efficiency with Vanadium Oxide-Modified PEDOT:PSS Hole Transport Layer
Erdin Almuqoddas – Bandung Institute of Technology & National Research and Innovation Agency Republic of Indonesia, Indonesia
16:00 – 16:15: S6.5 Symmetric and Asymmetric Porphyrin as Passivating Agent for Perovskite Solar Cells
Phutri Milana – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 7; Signal & Image Processing Techniques
Breakout Room 2 – 15:00 – 16:15 GMT+7
Session Chair: Iman Firmansyah, Ph.D. – National Research and Innovation Agency (BRIN), Indonesia
15:00 – 15:15 S7.1 Search and Rescue (SAR) Flight Simulations Utilizing Low-Budget Autonomous Quadcopter and Image Processing Technology
Budi Hartono – Politeknik Negeri Bandung, Indonesia
15:15 – 15:30 S7.2 Automatic Bow Echo Shape Detection Using Combination of Image Processing and Skeletonization in X-Band Radar Image
Ginaldi Ari Nugroho – National Research and Innovation Agency (BRIN), Indonesia
15:30 – 15:45 S7.3 EEG Analysis based on Spectral Edge Frequency during Mental Arithmetic Task
Ulfah Nadiya – National Research and Innovation Agency (BRIN), Indonesia
15:45 – 16:00 S7.4 Motion Capture Systems with IMU Sensors: A Preliminary investigation of Oil Palm harvesting Techniques
Nugrahaning Dewi – National Research and Innovation Agency (BRIN), Indonesia
16:00 – 16:15 S7.5 Cognitive Linear Trajectory on GPR Imaging Using Lightweight Machine Learning
Budiman P. A. Rohman – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 8; Control System, Robotics and Mechatronics
Breakout Room 3 – 15:00 – 16:00 GMT+7
Session Chair: Mochamad Adityo Rachmadi S.T. – National Research and Innovation Agency (BRIN), Indonesia
15:00 – 15:15: S8.1 PI Controller Design for MIMO process on the Autoclave Passivation
Praditya Vankabo – National Research and Innovation Agency (BRIN), Indonesia
15:15 – 15:30: S8.2 Comparison of Spine Curvature Images Classification Using GoogLeNet and AlexNet
Yessi Jusman – National Research and Innovation Agency (BRIN), Indonesia
15:30 – 15:45: S8.3 Visual Target Locking during Fast Ground Maneuver using Enhanced ORB Predictive Particle Filter
Heru Taufiqurrohman – University of Indonesia, Indonesia
15:45 – 16:00: S8.4 Performance comparison of applying integer and fractional order calculus to DC motor speed control experiments
Jalu Ahmad Prakosa – National Research and Innovation Agency (BRIN), Indonesia
Day 2 – Thursday, 16 November 2023
Parallel Session 9; Wireless & Wired Communications
Breakout Room 1 – 09:10 – 10:25 GMT+7
Session Chair: Galih Nugraha Nurkahfi M.T. – National Research and Innovation Agency (BRIN), Indonesia
09:10 – 09:25: S9.1 A Comparative Study on Machine Learning-Aided Flow Traffic Generators
Toto Bachtiar Palokoto – National Research and Innovation Agency (BRIN), Indonesia
09:25 – 09:40: S9.2 On Modeling a Bottleneck Link using Dummynet
Mohammad Hamdani – National Research and Innovation Agency (BRIN), Indonesia
09:40 – 09:55: S9.3 Influences of Channel Estimation Error and Energy Scavenging Non-linearity on MIMO NOMA
Van Khuong Ho – Ho Chi Minh City University of Technology, Vietnam
09:55 – 10:10: S9.4 Transmitter and Receiver Design for Visible Light Communication System with Off-the-Shelf LED Towards its Implementation Possibility for Vehicle to Vehicle/Infrastructure (V2V/V2I) Communication
Tinova Pramudya – National Research and Innovation Agency (BRIN), Indonesia
10:10 – 10:25: S9.5 Federated Meta-Learning for task offloading and resource allocation in MEC-IoT
Bakhit Amine Adoum – Ecole Nationale Superieure des Technologies de l’Information et de la Communication, Chad
Parallel Session 10; Control System, Robotics and Mechatronics
Breakout Room 2 – 09:10 – 10:10 GMT+7
Session Chair: Bernadus Herdi Sirenden M.Si. – National Research and Innovation Agency (BRIN), Indonesia
09:10 – 09:25: S10.1 Fuzzy-proportional Controller of EPS for Autonomous Driving of Small Electric Vehicles
Aryo Sadono – National Research and Innovation Agency (BRIN), Indonesia
09:25 – 09:40: S10.2 Hybrid Control Strategy for Underactuated AUVs to Overcoming Environmental Uncertainties
Maristya Rahmadiansyah – National Research and Innovation Agency (BRIN), Indonesia
09:40 – 09:55: S10.3 Experimental Investigation into The System Performance of Rack and Pinion Gear Using Inverse Kinematics for Lifting Mechanism in ABU Robocon Mobile Robot
Leo Tirto Purnomo – Telkom University, Indonesia
09:55 – 10:10: S10.4 Autonomous Docking Method via Non-linear Model Predictive Control
Roni Permana Saputra – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 11; Electronics Materials, Components, & Circuits
Breakout Room 3 – 09:10 – 10:10 GMT+7
Session Chair: Dr. Nunik Nurhayati – National Research and Innovation Agency (BRIN), Indonesia
09:10 – 09:25 S11.1 Analysis Study on The Effect of Perovskite Layer Thickness on Photo-capacitor Device for Retinomorphic Sensor Application
Reni Dwi Putri – IPB University, Indonesia
09:25 – 09:40 S11.2 Observation of Glucose Concentration in Water using Surface Plasmon Resonance
Atikah Qonitah – National Research and Innovation Agency (BRIN), Indonesia
09:40 – 09:55 S11.3 The Influence of the Quenching Process on the Local Structure and Thermoelectric Properties of Polycrystalline LaCoO3
Mohammad Dani Al Qori – National Research and Innovation Agency (BRIN), Indonesia
09:55 – 10:10 S11.4 Design Implementation of Flood Early Warning System for Residential Monitoring
Thariq Auliya Arrazaq – President University, Indonesia
Parallel Session 12; Control System, Robotics and Mechatronics
Breakout Room 1 – 10:35 -11:35 GMT+7
Session Chair: Dayat Kurniawan M.T. – National Research and Innovation Agency (BRIN), Indonesia
10:35 – 10:50 S12.1 Hand Gesture Recognition-Based Control System Using Computer Vision for Transporter Robot
Bagas Martinus Rianu – University of Merdeka Malang, Indonesia
10:50 – 11:05 S12.2 Transformer with Time Vector Representation for Remaining Useful Life Prediction of Lithium-Ion Batteries
Asri Rizki Yuliani – National Research and Innovation Agency (BRIN), Indonesia
11:05 – 11:20 S12.3 Precise Temperature Control Strategy for Laboratory-Scale Fermentation Process
Mochamad Adityo Rachmadi – National Research and Innovation Agency (BRIN), Indonesia
11:20 – 11:35 S12.4 Fruit Recognition Through Active Grasping of Two-Fingered Gripper Using a Soft Skin Sensor
Oka Mahendra – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 13; Signal & Image Processing Techniques
Breakout Room 2 – 10:35 – 11:50 GMT+7
Session Chair: Budiman Putra Asma’ur Rohman – National Research and Innovation Agency (BRIN), Indonesia
10:35 – 10:50 S13.1 Exploring EEG Frequency Bands as a Feature for Machine Learning in Drowsiness Detection
Aulia Darojatun – National Research and Innovation Agency (BRIN), Indonesia
10:50 – 11:05 S13.2 VIIRS Day/Night Band Image Processing System for Boat Detection in Java Sea, Indonesia
Karunika Diwyacitta – National Research and Innovation Agency (BRIN), Indonesia
11:05 – 11:20 S13.3 Shoulder Muscles Activation during Oil Palm Fruit Harvesting Measured by Electromyography
Kadek Sanjaya – National Research and Innovation Agency (BRIN), Indonesia
11:20 – 11:35 S13.4 Analysis of a Backpropagation Neural Network Training Algorithm for EEG-Based Drowsiness Identification
Annida Rahmawati – National Research and Innovation Agency (BRIN), Indonesia
11:35 – 11:50 S13.5 U-Net Utilization on segmentation of Aerial Captured Images
Irfansyah Yudhi Tanasa – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 14; Electronics Materials, Components, & Circuits
Breakout Room 3 – 10:35 – 11:50 GMT+7
Session Chair: Joni W Simatupang – President University, Indonesia
10:35 – 10:50 S14.1 Visible Light trapping in dye-sensitized solar cell with Vanadium-doped ZnO as back reflector layer
Lia Yuliantini – National Research and Innovation Agency (BRIN), Indonesia
10:50 – 11:05 S14.2 The effect of dineohexyl phosphinic acid on the photovoltaic performance of dye sensitized solar cell based on organic dyes
Intan Paramudita – National Research and Innovation Agency (BRIN), Indonesia
11:05 – 11:20 S14.3 Study on Thick Film Humidity Sensor using PVA-Gelatin-SnO2 Sensing Layer
I Dewa Putu Hermida – National Research and Innovation Agency (BRIN), Indonesia
11:20 – 11:35 S14.4 Design microcantilever array based carbon nanotubes for detection of heavy metal ions in water
Elaf Hadi – University of Babylon Babil, Iraq
11:35 – 11:50 S14.5 Water insoluble polyoxometalate derivative (PW11Cs) with high light-reflective properties for counter electrode in dye-sensitized solar cells
Nunik Nurhayati – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 15; Wireless & Wired Communications
Breakout Room 1 – 13:00 – 14:00 GMT+7
Session Chair: Imelda Uli Vistalina Simanjuntak – Mercu Buana University , Indonesia
13:00 – 13:15 S15.1 Initial Coverage Analysis of LoRa Communication for Light Buoy Monitoring System in Port Area
Bondan Suwandi – National Research and Innovation Agency (BRIN), Indonesia
13:15 – 13:30 S15.2 VRRP-Based WAN Redundancy Protocol for Dual Gateway Cable Based Tsunameter (INA-CBT)
Rifqi Fajar Giyana – National Research and Innovation Agency (BRIN), Indonesia
13:30 – 13:45 S15.3 Performance Analysis of LoRaWAN Node to LoRaWAN Infrastructure for Environmental Monitoring in Sub-Urban Area
Fito Herminawan – National Research and Innovation Agency (BRIN), Indonesia
13:45 – 14:00 S15.4 BC-MTD: Blockchain-driven Moving Target Defense for Secure Vehicle Access
Arief Indriarto Haris – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 16; Antenna Devices & Techniques
Breakout Room 2 – 13:00 – 14:00 GMT+7
Session Chair: Marcellina Ayudha Kristanti Titasari S.T., M.Sc- National Research and Innovation Agency (BRIN), Indonesia
13:00 – 13:15 S16.1 38 GHz Wide Band and High Gain Stacked Antenna Modelling for 5G Applications
Saeed Alzahrani – University of Tabuk, Saudi Arabia
13:15 – 13:30 S16.2 Axial-Ratio Beamwidth Enhancement of Circular Polarized Microstrip Antenna Using Periodic Conducting Structures
Aditya Inzani Wahdiyat – National Research and Innovation Agency (BRIN), Indonesia
13:30 – 13:45 S16.3 Directive Beam Metamaterial Inspired Transparent Folded Dipole Antenna for Millimeterwave Applications
Topik Teguh Estu – National Research and Innovation Agency (BRIN), Indonesia
13:45 – 14:00 S16.4 Design of C-Band Microstrip Fractal Antenna Combined with Pyramidal Horn
B. Pratiknyo Mahatmanto – National Research and Innovation Agency (BRIN), Indonesia
Parallel Session 17; Signal & Image Processing Techniques
Breakout Room 1 – 14:00 – 15:15 GMT+7
Session Chair: Marlin Ramadhan Baidillah, Ph.D. – National Research and Innovation Agency (BRIN), Indonesia
14:00 – 14:15 S17.1 An Analytical Approach to Uninterrupted UAV Video Communication: Simulations and Findings
Yomi Guno – National Research and Innovation Agency (BRIN), Indonesia
14:15 – 14:30 S17.2 Image Super Resolution Using ESRGAN: A Preliminary Experimental Study
Bella Wahmilyana Asril – Institut Teknologi Bandung, Indonesia
14:30 – 14:45 S17.3 Palm Fruit Ripeness Characteristics Specification Using Free Space Measurement Method
Yosy Rahmawati – University of Indonesia, Indonesia
14:45 – 15:00 S17.4 Rapid And Efficient Facial Landmark Identification By Light And High Resolution Network Using Artificial Intelligence
Mohammed Eltahir Abdelhag – Jazan University, Kingdom of Saudi Arabia
15:00 – 15:15 S17.5 Building Trust: IoT security and Blockchain integration
Khair Ul Nisa – University of Bisha, KSA
Parallel Session 18; Antenna Devices & Techniques
Breakout Room 2 – 14:00 – 15:15 GMT+7
Session Chair: Aditya Inzani Wahdiyat S.T – National Research and Innovation Agency (BRIN), Indonesia
14:00 – 14:15 S18.1 Simulation of Circular Patch Unit Cell as a Reflector on F4BMX220 Substrate
R. Priyo Hartono Adji – National Research and Innovation Agency (BRIN), Indonesia
14:15 – 14:30 S18.2 A Filtenna Design for Ku-Band Satellite Mobile Terminal
Fajri Darwis – National Research and Innovation Agency (BRIN), Indonesia
14:30 – 14:45 S18.3 Terahertz Propagation Investigation of Terahertz Imaging on A Cancer Object
Catur Apriono – Universitas Indonesia, Indonesia
14:45 – 15:00 S18.4 Design and Comparative Analysis of Microstrip Antenna Using Neural Networks
Silvania Teixeira Goncalves – University of Campinas (UNICAMP), Brazil
15:00 – 15:15 S18.5 Artificial Periodic Structures for Bandwidth and Gain Enhancement of Vivaldi Antennas used in GPR Applications
Kurnia Kartika – Institut Teknologi Sepuluh Nopember, Indonesia
Registration
Three categories of participation in ICRAMET 2023: 1. Presentations with papers for IEEE Member/BRIN Researcher (Registration Fee: IDR 1,850,000, already including publication cost) 2. Presentations with papers for non-IEEE Member (Registration Fee: IDR 2,100,000, already including publication cost) 3. General participants (Registration Fee: IDR 100,000, certificate will be provided) Registration through this website is for the purpose of information only. All editorial process, e.g. paper submission, review, are conducted through EDAS System (https://edas.info/N30762). If you have not submit your full paper through EDAS, we would like to recommend you to do so as soon as possible. The first deadline for full paper submission is Registration Policies: Bank account for Registration Payment: |
Organizing Committee
Advisory Board
Dr. Eng. Budi Prawara (Chairman of Organization Research of Electronics and Informatics BRIN, Indonesia)
Yusuf Nur Wijayanto Ph.D. (Head of Research Center for Electronics BRIN, Indonesia)
Dr. Nasrullah Armi (Head of Research Center for Telecommunication BRIN, Indonesia)
Organizing Committee
Conference Chair
Yuliar Firdaus Ph.D. (Research Center for Electronics BRIN, Indonesia)
Conference Vice-Chair
Chaeriah Bin Ali Wael M.T. (Research Center for Telecommunication BRIN, Indonesia/IEEE Indonesia Section)
Technical Program Committee
TPC Chairs
Dr. Widhya Budiawan (Research Center for Electronics BRIN, Indonesia)
TPC Co-Chair
Salita Ulitia Prini M.T. (Research Center for Telecommunication BRIN, Indonesia)
Track Chairs
Dayat Kurniawan M.T. (Research Center for Telecommunication BRIN, Indonesia/IEEE Indonesia Section)
Arief Budi Santiko M.T. (Research Center for Telecommunication BRIN, Indonesia)
Fajri Darwis S.T., M.Eng. (Research Center for Telecommunication BRIN, Indonesia)
Dr. Lia Aprilia (Research Center for Photonics BRIN, Indonesia)
Dr. Nunik Nurhayati (Research Center for Electronics BRIN, Indonesia)
Dr. Suyoto (Research Center for Telecommunication BRIN, Indonesia)
Dr. Puput Dani Prasetyo Adi (Research Center for Telecommunication BRIN, Indonesia)
Dito Eka Cahya Ph.D. (Research Center for Electronics BRIN, Indonesia)
Publication
Dr. Wilman Septina (Research Center for Electronics BRIN, Indonesia)
Ardita Septiani M.Sc. (Research Center of Advanced Materials BRIN, Indonesia)
Vita Awalia Mardiana, M.T. (Research Center for Telecommunication BRIN, Indonesia)
Zaid Cahya Dinul Haq M.T. (Research Center for Electronics BRIN, Indonesia)
Marlin Ramadhan Baidillah Ph.D. (Research Center for Electronics BRIN, Indonesia)
Dr. Lia Yuliantini (Research Center for Electronics BRIN, Indonesia)
Nidya Chitraningrum Ph.D (Research Center for Biomass and Bioproduct BRIN, Indonesia)
Secretariat
Secretary
Intan Paramudita M.T. (Research Center for Electronics BRIN, Indonesia)
Treasurer
Asih Setiarini M.Sc. (Research Center for Electronics BRIN, Indonesia)
Intan Paramudita M.T. (Research Center for Electronics BRIN, Indonesia)
Event Programs
Nadya Larasati Kartika M.Si. (Research Center for Advanced Materials BRIN, Indonesia)
Putri Nur Anggraini S.Si. (Research Center for Electronics BRIN, Indonesia)
Rizky Rahmatullah, A.Md.T. (Research Center for Telecommunication BRIN, Indonesia)
B. Berlian Surya Wicaksana S.T. (Research Center for Telecommunication BRIN, Indonesia)
Suisbiyanto Prasetya S.T (Research Center for Telecommunication BRIN, Indonesia)
Facilities and Equipment
Yulia Rosidah, S.AB. (Bureau for Public Communication, General Affairs, and Secretariat BRIN, Indonesia)
Jaka Sontana A.Md. (Bureau for Public Communication, General Affairs, and Secretariat BRIN, Indonesia)
Promotion Section
Teguh Praludi, M.T. (Research Center for Telecommunication BRIN, Indonesia)
Dr. Novrita Idayanti (Research Center for Electronics BRIN, Indonesia)
IT and Documentation
Lukman Syarif Hidayat A.Md. (Center for Scientific Data and Documentation BRIN, Indonesia)
Anton Surahmat M.I.Kom. (Bureau for Public Communication, General Affairs, and Secretariat BRIN, Indonesia)
Scientific Committee
-
- Dr. Mohammed Aal-Nouman (Al-Nahrain University, Iraq)
- Prof. Azremi Abdullah Al-Hadi (Universiti Malaysia Perlis, Malaysia)
- Iwan Adhicandra (Bakrie University, Indonesia)
- Sumer Can (Diodes, Inc., USA)
- Dr. Wazir Zada Khan (Jazan University, Saudi Arabia)
- Prof. Hiroshi Murata (Mie University, Japan)
- Dr. Shashikant Patil (Vishwaniketan Institute of Management Entrepreneurship Engineering and Technology Khalapur Raigad MS, India)
- Dr. Ali Rafiei (General Motors, Canada)
- Dr. Hussain Saleem (University of Karachi, Pakistan)
- Dr. Sandhya Save (TCET University of Mumbai, India)
- Dr. Joni Simatupang (President University, Indonesia)
- Prof. Mustapha Yagoub (University of Ottawa, Canada)
- Dr. Techn. Prasetiyono Hari Mukti, S.T., M.T (Institut Teknologi Sepuluh November/ IEEE Indonesia Section)
- Prof. Goib Wiranto (Research Center for Electronics BRIN, Indonesia)
- Dr. Yuyu Wahyu (Research Center for Telecommunication BRIN, Indonesia)
- Dr. Eng. Arief Suryadi Satyawan (Research Center for Telecommunication BRIN, Indonesia)
- Dr. Novrita Idayanti (Research Center for Electronics BRIN, Indonesia)
- Dr. Natalita Maulani Nursam (Research Center for Electronics BRIN, Indonesia)
- Dr. Erry Dwi Kurniawan (Research Center for Electronics BRIN, Indonesia)
- Dr. Agus Subekti (Research Center for Telecommunication BRIN, Indonesia)
- Dr. Budiman Putra Asma’ur Rohman (Research Center for Telecommunication BRIN, Indonesia)
- Robeth Viktoria Manurung Ph.D (Research Center for Electronics BRIN, Indonesia)
- Dr. Dipl. Ing. Michael Andreas Purwoadi DEA (Research Center for Electronics BRIN, Indonesia)
- Dr. Purwoko Adhi Dipl.Ing.,D.E.A. (Research Center for Telecommunication BRIN, Indonesia)
- Dr. Sasono Rahardjo B. Eng. M.Eng (Research Center for Electronics BRIN, Indonesia)
Patronage & Contact
Any company could be the official patron of ICRAMET 2023. We serve three packages as below:
1. Gold:
● The company logo appears on our website, leaflets, program, and all publicity materials.
● Summary of the company’s products and services offered in our book program.
● Repeatable virtual showroom opportunities for the company’s products on our website and during the conference.
● 1 Patron sessions.
● Three representatives as participants.
● Certificate.
● Plaque
2. Silver
● The company logo appears on our website, leaflets, program, and all publicity materials.
● Repeatable virtual showroom opportunities for the company’s products on our website and during the conference.
● 1 Patron sessions.
● Two representatives as participants.
● Certificate.
● Plaque
3. Bronze
● The company logo appears on our website, leaflets, program, and all publicity materials.
● One representatives as participants.
● Certificate.
● Plaque
Secretariat of ICRAMET 2023
Research Center for Electronics
National Research and Innovation Agency
Kompleks BRIN Bandung
Jl. Sangkuriang no.21
Email: icramet@brin.go.id